Spec sheets feel like a wall of numbers when you’re just trying to pick a phone or appliance. Here’s how to read product specifications: find who defined each term, check the units, and compare like with like.
This guide is part of the wider topic of how to choose consumer products, and it covers the spec-sheet step.
| Item | Value |
|---|---|
| EU energy label mandatory for phones and tablets sold in the EU | June 20, 2025 |
| Energy efficiency class scale | A (best) to G (worst) |
| Drop reliability class scale | A (most robust) to E (least robust) |
| Ecodesign battery minimum | At least 800 cycles, keeping at least 80% of initial capacity |
| Example rated battery capacity on one declared sheet | 4175 mAh |
| Example battery endurance per cycle on the same sheet | 51 hours |
The figures come from Android Authority’s June 20, 2025 report on the EU label and a Samsung product information sheet. They can change, so check the source before you rely on them.
Start with who defines each number
A figure on a spec sheet means little until you know how it is defined. In the EU’s smartphone and tablet labelling rules, declared values are the numbers the supplier provides in its technical documentation, which national authorities can use to verify compliance (Council of the EU document).
That does not make a number wrong. It means the first question is how it was measured, before you ask whether the figure looks big.
Regulated formats help because every product answers the same lines. As of Android Authority’s June 20, 2025 report, the EU label is mandatory for smartphones and tablets sold in the EU, so the same lines appear across brands.
Battery lines: capacity, endurance and lifespan are different things
Battery entries cause the most confusion because three separate ideas share one component. The EU definitions keep them apart:
- Rated capacity: the amount of electricity the manufacturer declares the battery can deliver under specified conditions, in milliampere-hours (mAh).
- Battery endurance per cycle: the time a device runs a defined test scenario on a fully charged battery before it shuts off, in hours.
- Battery endurance in cycles: how many charge/discharge cycles the battery withstands before its usable capacity falls to a set share of its rated capacity.
The SM-S942B sheet lists 4175 mAh rated capacity, 51 hours of endurance per cycle and 1200 cycles. Those answer different questions: how much is stored, how long one charge runs in the test scenario, and how many cycles the battery lasts.
A larger capacity figure does not guarantee longer hours. The SM-F976B sheet declares 4854 mAh yet the same 51 hours as the 4175 mAh model on the SM-S942B sheet, so compare the hours line, not mAh alone.
For lifespan, ecodesign requirements summarised by Android Authority call for batteries that withstand at least 800 cycles while retaining at least 80% of their initial capacity. That gives you a yardstick when a brand quotes its own cycle count.
Decode an IP code one digit at a time
The EU labelling annexes define an ingress protection rating as the protection an enclosure gives against solid foreign objects, water or both, measured with standardised test methods and shown through a coding system.
In Anern’s guide to the IEC standard, the first digit of an IP code runs from 0 to 6 and covers solids, while the second runs from 0 to 9 and covers liquids. Each position answers a separate question.
A letter X replaces a digit when that category was not tested or rated. IPX7, for instance, carries a water rating but no official dust rating according to the same guide, while IP6X is dust tight with the water digit left unrated.

The same guide describes IPX7 as protection against temporary immersion in water up to 1 meter for 30 minutes (Anern). That is a test condition, not a general promise.
Read the full code on each sheet. The SM-S942B sheet lists IP68 with a specified immersion depth of 1.50 m, while the SM-F976B sheet lists IP48. One changed digit is a different claim.
Treat letter grades as scales with defined ends
On the EU label, Android Authority reports that energy efficiency classes run from A (best) to G (worst). The drop reliability class is a separate scale from A (most robust) to E (least robust), and repairability is a third, from A (most repairable) to E (least).
A letter hides the number beneath it. Both Samsung sheets show repairability class C, but the underlying index is 3.01 on the SM-S942B and 2.78 on the SM-F976B.
Drop results work the same way. Each sheet shows class A for the repeated free-fall test, yet one declares 270 falls without defect (SM-S942B) and the other 210 falls (SM-F976B).
Screen scratch resistance shows a wide gap too. The SM-S942B declares 5 on the Mohs hardness scale and the SM-F976B declares 1 on the Mohs hardness scale.
Check how long support really lasts
A support promise is half a number without its start date. Ecodesign rules summarised by Android Authority ask for operating system updates for at least 5 years from the end of placement on the market of the last unit of a product model, so ask when the clock starts.
Spare parts follow the same logic. The same report lists an obligation to make critical spare parts available within 5-10 working days, and for 7 years after the end of sales of the product model on the EU market (Android Authority).
A sheet can also carry weblinks for spare-part availability and for end-user repair instructions, as the Samsung sheet does. Checking that those links exist is part of reading it.
What should you check before comparing two sheets?
- Confirm the unit and what it measures, such as capacity versus hours.
- Find the definition or standard behind each term.
- Read full codes rather than marketing words like “waterproof”.
- Note whether a figure is declared by the supplier or comes from a standardised test method.
- Make sure both sheets use the same format and the exact model code you plan to buy.
When you have two or three sheets in the same format, the guide on how to compare products shows how to line them up fairly.
If you are also weighing a used or renewed device, the guide on refurbished vs new electronics covers the trade-offs.
Frequently asked questions
Is a higher mAh number always better?
Show answer
Not by itself. Milliampere-hours describe stored charge, whereas the EU defines endurance per cycle as running time in a defined test scenario until the device shuts off, expressed in hours (Council of the EU document).
Does a water-resistance rating mean a phone is waterproof?
Show answer
No. A rating describes a defined test: the standard speaks of harmful ingress being impossible under set conditions of pressure and time (Anern). Treat it as a description of that test, not as a promise for every situation.
Do EU labels and ecodesign rules cover every device?
Show answer
No. Android Authority’s June 20, 2025 report says the ecodesign requirements apply to smartphones, feature phones, cordless phones and slate tablets, but not to tablet computers such as Windows tablets, flexible or roll-up displays, or high-security communication smartphones.
