You will choose better with a home improvement buying guide that starts from the job, not the spec sheet. Define the task, check the EU energy label, then compare running costs, noise and repair options.
| Item | Value |
|---|---|
| Year the EU energy label first appeared on fridges | 1994 |
| EU consumers who recognised the label (2024 Eurobarometer) | 93% |
| Consumers who said the label influenced a purchase in the past 5 years | 75% |
| Energy class scale on the latest label | A to G (replacing A+++ to D) |
| Household savings in 2020 from EU ecodesign and labelling rules | €182 to €266 per household |
| Projected savings by 2030 | €473 to €736 per household per year |
These figures come from the European Commission’s February 2025 article on energy efficient appliances. They can change, so check the source before you rely on them.
Start with the job, not the product
A good purchase begins with the job the product must do in your home. Write that job down before you open a shop page, because your requirements decide which specifications matter.
- Describe the task and how often it happens: daily laundry, occasional drilling or one damp room.
- Measure the space, including door widths, shelf heights and the position of sockets and water connections.
- Set a budget that covers running costs, consumables and repairs, not only the shelf price.
- Shortlist a few models and compare them on the same measures, ideally using official data.
- Find out what happens if the product fails: spare parts, repair options and warranty terms.
Keep the list of must-haves to two or three items and treat everything else as a tie-breaker. Long feature lists can hide the few specifications that affect daily use.
The general method for any product type is set out in how to choose consumer products, while screens, phones and similar devices have their own consumer electronics buying guide.

How to read the EU energy label
The energy class is the first thing most buyers see. According to the Commission’s February 2025 article, the latest label uses a simplified scale from A to G in place of the previous A+++ to D scale. The label itself first appeared on fridges in 1994.
Because the scale was reset, an old label and a new one are not directly comparable. The Commission’s announcement of the rescaled labels gave the example that a product with an A+++ class could become a B class without any change in its energy consumption. A BREEAM knowledge-base note reaches the same conclusion: it is not possible to establish a direct equivalence between old and new labels.
The label shows more than efficiency. Depending on the product, the Commission’s description says it can include:
- energy consumption per annum
- noise emissions
- water consumption
- capacity
- repairability and reliability class
An industry toolkit for retailers explains that the new measurements are based on real-life household usage, such as frequently used programmes and average capacities. For washing machines and washer-dryers, the same toolkit points to a new ‘Eco 40 – 60’ programme as the basis for the figures. Use the label as a like-for-like comparison tool, not as a forecast for your own home.
Scanning the label’s QR code takes you to the model’s entry in EPREL, the Commission’s product database. Manufacturers, including those outside the EU, must register their products there before selling them on the EU market, as the Commission article states.

What the savings figures do and do not tell you
The 2024 Ecodesign Impact Accounting Overview Report, as cited by the European Commission, put expense savings in 2020 from EU ecodesign and energy labelling rules at between €182 and €266 per household. By 2030, the projected range rises to between €473 and €736 per household per year.
These are estimates across households, so read them as context and not as a promise for one appliance. For your own case, multiply a model’s stated energy use by your electricity price and set the result against the price gap between models.
The label is also familiar to shoppers: in the 2024 Eurobarometer survey, 93% of EU consumers recognised it, and 75% said it had influenced their choice of appliance in the past 5 years, according to the same Commission article.
Connected appliances add another factor. A Conformance summary of the energy labelling regulation says the rules close the loophole of firmware or software updates that change efficiency during use, and that a customer may refuse an update that worsens performance. Read the regulation’s own text before you rely on that for a specific product.
Which appliances carry the newest label?
As of the Commission’s February 2025 article, the latest generation of the label could be found on dishwashers, washing machines, refrigerators, electronic displays, light sources and tyres. The rescaled approach began in 2021 with 5 product groups.
The same article said that, from June 2025 and July 2025 respectively, the new label was due to be required on smartphones and tablets and on tumble dryers. Check the retailer’s listing or EPREL to see which label a particular model carries.
These guides continue from the label basics:
- Read how to choose a washing machine first if laundry is your project.
- Continue with how to choose a heat pump dryer if you plan to dry clothes indoors.
- For a kitchen project, how to choose a dishwasher is the next read.
Buying tools, floor care and air equipment
Some categories depend more on practical fit than on the energy class. The Commission’s article says that, as of February 2025, labelling and ecodesign requirements apply to a range of cooking and cleaning appliances, heating, cooling and ventilation units, electronics, lighting products, tyres and industrial products and machinery. Whether a specific model is listed is something to confirm on its product page or in EPREL, not to assume.
- Cordless tools: battery compatibility across your tools deserves as much attention as one tool’s specification, and how to choose a cordless drill is a sensible place to start.
- Robot vacuums: floor types, obstacles and the cost of spare parts shape the choice, so how to choose a robot vacuum is worth reading before you compare models.
- Air purifiers: room size, filter replacement cost and night-time noise are the usual deciding points, and how to choose an air purifier goes through them.
- Dehumidifiers: match the unit to the room and the damp problem, and check how the collected water is drained, as covered in how to choose a dehumidifier.

A checklist before you buy
Run through this list for any appliance or tool, and note the answers next to each shortlisted model.
- Does it physically fit, including the route through doors and stairs?
- Which energy class and consumption figure does the label show, and does the EPREL entry agree?
- How loud is it, and where will it sit relative to bedrooms or a home office?
- What will it cost to run and maintain over the years you expect to keep it?
- Are spare parts, filters or batteries easy to find, and is there a repairability class on the label?
- What do the warranty and return terms say?
- If it is connected, can you use it without an account, and how are updates handled?
Frequently asked questions
Is a new A the same as an old A+++?
Show answer
No. The scale was reset, so labels from before and after the change are not interchangeable. The industry toolkit from AMDEA says current models are rated simply from A to G with no plusses, which is the quickest way to recognise the newer design.
How do I look up the details of one model?
Show answer
Search EPREL by product group and filter on the criteria you care about, or open a model’s page directly from the label. The same toolkit describes the QR code as sitting in the upper right corner of the label.
Is the most efficient class always the best buy?
Show answer
Not automatically. A top class can come with a higher purchase price, so weigh it against how often you will use the product, its capacity, its noise and the repair options.
